Minimum Order Quantity | 50 Piece |
Packaging Type | Can |
Form | Aerosol |
Recoated Time | After 36 hours |
Full Cure Days | 7-10 Days |
Dries Time | 15 Minute |
#6017 COLD GALVANISING COMPOUND: Prevent rust caused leakages & need for frequent re-painting of metallic structures. Unique technologies air dry & chemically fuse to rusted surfaces, stopping rust growth & creep age, via superior quality cathodic protection tec Bonds strongly with minimum surface preparation for long lasting protection.
Applications: All pre-rusted metallic surfaces, weld joints both as a long term rust preventative & as an coating prior to painting portions of galvanised surfaces where 'in-situ', cold re-galvanisation is desired
Minimum Order Quantity | 100 Unit |
Usage/Application | Industrial Use |
Frequency | Monthly |
Packaging Size | 24 per carton |
Packaging Type | aerosol |
Brand | SPRAYZET |
Color | SILVER |
Material | Zinc |
Appearance | SILVER COLOR |
Applications: All pre-rusted metallic surfaces, weld joints both as a long term rust preventative & as an coating prior to painting portions of galvanised surfaces where 'in-situ', cold re-galvanisation is desired
Minimum Order Quantity | 24 Piece |
Packaging Type | Can |
Color | Colorless |
Dielectric Strength | 36.0 kV/mm |
VOC | 96% |
#6001 SAFETY SOLVENT: No CFC's, non-flammable, non-conductive, non-corrosive, ultra high di-electric strength, high KB value, fast drying "on-line" cleaner & degreaser. Leaves no sticky film, powdery or oily residues. Combination of least toxic, user & workplace friendly solvents. Provides powerful consistent cleaning power.
Applications: Insulators, bus-bars. generators, commutators, cables, slip-rings, motor casings, connections... prevents short circuiting, leakages, corrosion, fire hazards........
Minimum Order Quantity | 50 Piece |
Color | Red |
Finish | High Gloss |
Packaging Type | Can |
Drying Time (Minutes) | 15 |
Coating Color | Red |
Red Insulating Varnish Spray thoroughly penetrates into windings & coils and seals out dust and moisture. Designed to be used as a finishing coat over existing impregnating varnishes as well as to provide class H insulation & protection on unprotected motor surfaces (slots, clamps, plates) so as to enhance the life and reliability of the system as a whole. Also available in Green & Clear colors.
Minimum Order Quantity | 24 Can |
Material | Chemical |
Color | Clear |
Form | Aerosol |
Usage/Application | Domestic Use |
Packaging Size | 150 ML 500ML |
Packaging Type | RUST REMOVER All-in-one |
MPP0109 ALL-IN-ONE: MULTIPURPOSE RUST PENETRATOR CUM CLEANER: Non-toxic, silicone free, ozone friendly, Safe for metal, varnishes, rubber, plastic and fabric. Low surface tension product has superior surface "Wettability" and coverage. Technically superior, multi-use, also useful for displacing moisture, anti-corrosion and light lubrication.
Applications: Rust penetration & cleaning, degreasing, moisture proofing, restoring electrical values & improving electrical conductivity in make-break systems (contactors, relays, switches...) windings, coils, transformers, insulators, re-opening rusted/jammed assemblies rust cleaning light lubrication & anti-corrosion....
Minimum Order Quantity | 100 Piece |
Material | ZINC SPRAY |
Packaging Size | LTR |
Packaging Type | Can |
Color | SILVER |
Form | Liquid |
Usage/Application | Industrial Use |
Brand | SPRAYZET |
Appearance | GREY SILVER |
Packaging Type | bottle |
Grade Standard | Industrial Grade |
Packaging Size | 700ml |
Quantity Per Pack | 24 |
Model Grade | #6001 |
Usage/Application | Industrial |
Minimum Order Quantity | 48 Can |
Brand | SPRAYZET |
Color | Clear |
Form | Aerosol |
Pack Sizes LT/KG | 700 ML |
Product Type | aerosol |
Packaging Type | Can |
#6006 ALL-4: GENERAL PURPOSE RUST PENETRATOR CUM CLEANER: Non-toxic, silicone free, ozone friendly, Safe for metal, varnishes, rubber, plastic & fabric. Low surface tension product has superior surface "Wettability" & coverage. Technically superior, multi - use, also useful for displacing moisture, restoring 'IR' valves, anti-corrosion & light lubrication.
Applications: Rust penetration & cleaning, degreasing, moisture proofing, restoring electrical values & improving electrical conductivity in make-break systems (contactors, relays, switches...) windings, coils, transformers, insulators re-opening rusted/jammed assemblies rust cleaning light lubrication & anti-corrosion....
Packaging Type | Can |
Brand | Sprayzet |
Can Material | Tin |
#6013 MOISTURE DISPLACER : Multi application fluid for cleaning, de-watering, preventing corrosion and improving conductivity in electrical and electronic systems. Di-electric product restores electrical properties lost due to moisture, corrosion, dust and carbon. Prevents arcing & sparking & provides long term protection. Specific gravity heavier than '1'.
Applications: Protecting contactors, relays, solenoids, control terminals, capacitors, fuse boxes, switch connectors, switchgears, electronic PCB's and equipments against moisture and chemical fumes.
Features | Base Oil |
Form | Liquid |
Size (ml) | 400ml |
. #6025 MOLY CHAIN LUBE: High grade synthetic oil, black color and heavy duty moly - based high temperature lubricant. Excellent penetration & film adhesion.
Applications: Hoist chains, saws, conveyors, link and roller assemblies, chain drives.........
Minimum Order Quantity | 24 Piece |
Packaging Type | Can |
Brand | SPRAYZET |
Grade Standard | Technical Grade |
Physical State | Liquid |
Usage | Industrial |
#6012 PCB COATING: Single component acrylic plastic coating; fast drying; conformal; water clear transparency; good electrical properties; high resistance to burning, heat, cold, salts, alkalis, mild acids-will not peel, crack or dis-color; solder through and removable if required; lasting protection against wear, handling and oxidation; excellent thermal conductivity.
Applications: Enhances the working lifespan and reliability of electronic PCB assemblies. Seals-off dials, gauges, instruments….. improves reliability. Di-electric plastic coating of electrical control panels, junction boxes, motor casings, copper and brass, fixtures protects against rust and corrosion………
Minimum Order Quantity | 25 Piece |
Purity | High Purity |
Grade Standard | Technical Grade, Plastic & rubber moulding, Reagent Grade |
Size | 500 & 700 ML Aerosol containers |
Country of Origin | Made in India |
Brand | Sprayzet/ TWIN make |
Net Weight | 250 Grams to 280 grams |
Physical State | Liquid, Gas |
Usage | Industrial, Injection & Blow molding |
Density | 70 g/ml |
#4803 SILCO-R: Silicon based mold release agent for plastic, rubber, polyster, nylon etc. Its colorless spray film acts as a general purpose lubricating agent for drying rolls, clocks and precision equipment.
Applications: All types of metal molds & dies.....
Minimum Order Quantity | 24 Piece |
Usage/Application | CARBON CLEANER |
Quantity Per Pack | 700ML |
Brand | Twin Tech |
Physical State | Liquid |
Specific Gravity | 0.83-0.87 |
Packaging Type | Can |
#6008 CARBON REMOVER: Uniquely penetrates & ‘Lifts off’ carbonaceous coatings, thick varnishes, acrylic coatings, adhesives etc. User & surface safe. Minimum labour input. Highly effective on all types of coatings & deposits.
Applications: Carbon deposits from make-break contactors, relays, commutators, insulators, bus-bars. Removing varnishes & adhesives when overhauling.
Minimum Order Quantity | 24 Piece |
Vapor Pressure | 2.03mmHg |
Percent Volatile | Greater than 80% |
Solubility in Water | Insoluble |
#6005 PEN OIL: HEAVY DUTY RUST PENETRATOR: Penetrates rust & re-opens severely rusted assemblies. Ultra specialized specific use formulation with uniquely low surface tension and unmatched penetration. Has more reliable performance and is required in lesser quantities. Non acidic and non corrosive formulation. Superior quality & economy. Also useful in bearing maintenance applications (to clean caked up old grease residues).
Applications: Non-destructive re-opening of frozen/rusted/seized assemblies. Cleaning of precision moving etc.....
Minimum Order Quantity | 24 Piece |
Packaging Type | Can |
Color | TRANSPERENT |
Shelf Life | 2 YEARS |
Grade Standard | Reagent Grade |
Physical State | Liquid |
Usage | Industrial, Commerical, Laboratory |
#6007 TUFF CLEAN: PAINT & VARNISH REMOVERS: Designed to effectively & safely remove dirt, grease & varnish. Simply spray on, allow to set for 15 minutes & flush with water. Safe 100% bio-degradable, non-corrosive & non-staining. Penetrates to the metal for excellent & highly economical degreasing.
Applications: Compressors, burner nozzles, engine parts, gaskets, painted surfaces, cardmium compound.......
Minimum Order Quantity | 24 Piece |
Usage/Application | Home |
Quantity Per Pack | 700ML |
Packaging Type | Can |
Paint Color | tranparent |
Model Name/Number | Evershine Battery Terminal Coating #BTC0119 |
Color | Red |
Usage/Application | Metal |
Brand | EVERSHINE |
Packaging Type | Can |
Paint Type | Spray |
Types Of Spray Paints | Protects battery and cable terminals against leakages, acid sulfating and corrosion Prevents current losses and enhances battery life |
Sheen Type | Natural Strain |
Form | Liquid |
Packaging Size | 500 ml, 150 ml |
Packaging Type | 700ml |
Flash Point (deg. Celsius) | -18 |
Film Type | Non-Drying |
Appearance | Clear Light Amber Liquid |
Specific Gravity | 0.6771 |
Base Type | Organo Molybdenum |
#6027 WIRE ROPE LUBE : Tough and pliable with extra adhesion. Lubricates as it waterproofs. Weather resistant. Will not become brittle. Withstands extreme temperature and pressure. Penetrates deep into metal pores for complete lubrication. Foaming action ensures total coverage.
Applications: Wire ropes, heavy duty drive chains, die set leader pins, screw threads, chucks......
Form | Liquid |
Physical State | Liquid |
Origin | Natural |
Packaging Size | 5 litre |
Packaging Type | Gallon |
Surface of Application | Metal |
Form | Aerosol |
Paint Color | White |
Packaging Type | Can |
#6011 BATTERY TERMINAL COATING: Air tight, water proof and acid resistant, anti-sulfation coating. Resistant to heat, gasoline, oil & grease, will not crack or peel when correctly applied on undamaged batteries operating in conditions of medium acidity.
Applications: Protecting battery and cable terminals against leakages, acid sulfation and corrosion. Prevents current losses and enhances battery life.
Minimum Order Quantity | 24 Piece |
Vehicle Type | Heavy Vehicle |
Form | Liquid |
Unit Pack Size | 700ML |
Packaging Type | Can |
Relative Density | INDUSTRIAL AEROSOL MAINTENCE |
Grade | A |
Minimum Order Quantity | 24 Can |
Application | Industrial, Automotive |
Packaging Type | 24 cans |
Packaging Size | 700ml |
Packing | Can |
White Lithium Grease Spray is a white, translucent, penetrative grease with a slightly creamy consistency, penetrates and forms a protective film that withstands corrosion loads and speeds. Provides all-weather lubrication for any moving part. Eliminates squeaks and squeals and won't run or wash away.
Applications:
Minimum Order Quantity | 50 500ML |
Brand | EVERSHINE |
Weight | 500ml |
Color | transparent |
Packaging Type | 24 cans |
Country of Origin | Made in India |
CE0107 Cockpit Enhancers: This formulation provides an easy-to-apply product featuring poly-dimethy-lsiloxane that give good gloss/color and that help mask light scratches. Cleans and cares for all plastic parts in the car interior. Cockpit Enhancers is used to remove the hardened dirt and grease built in the car dashboard and makes it look shiny. Reliably prevents electrostatic charges and is therefore dust- repellent. Renews and maintains the matt and structured surface (soft-feeling effect). Leaves pleasant and fresh scent behind.
Usage/Application | Multipurpose |
Physical State | Liquid |
Packaging Size | 50 kg Can |
Packaging Type | Can |
Color | Blue |
Size | 50 kg |
Minimum Order Quantity | 700 Litre |
Physical State | Aerosol, Liquid |
Usage | Industrial |
Packaging Size | 700ml |
Packaging Type | Can |
1633 RUBBER RELEASE: Rubber release agent for demanding rubber molding applications such as rubber mats produced from recycled rubber or tire applications for side wall and tread molding. Designed to provide multiple releases per application with no contaminating transfer.
APPLICATION:
♦ Excellent persistence of water repellency and mold releasability
♦ Provides excellent luster and water repellency to molded parts
♦ Mold release spray for urethane casting
♦ Mold release agent for plastics, rubber parts, and tire moldingsForm | Liquid |
Packing Type | Can |
Non Flammable | Yes |
Capacity (ml) | 500 |
Anti Spatter Spray is non Silicone spatter release agent effectively prevents the adhesion of welding spatters on coated surfaces. Easier, cleaner and more cost-effective. Enhances life of MIG, TIG and TAG tips. Will not harm user's health like silicone-based formulations.
Physical State | Liquid |
Usage | Industrial |
Packaging Type | Can |
Grade Standard | Reagent Grade |
Capacity (ml) | 400 |
6018 SS COAT: of pure 316L stainless steel flakes & highly resistant epoxy ester resin. Provides a hard metallised coating resistant to corrosion, harsh chemicals extreme weathering & high temperature.
Applications: Junction boxes, panels, motor & pump casings, power transformers, tanks, towers...
Minimum Order Quantity | 50 Piece |
Form | Foam |
Packaging Type | Tube |
Grade Standard | Technical Grade |
Color | transparent |
Minimum Order Quantity | 200 Litre |
Brand | SPRAYZET |
Usage/Application | Industrial |
Packaging Type | Can |
Quantity Per Pack | 700ML |
Packaging Size | CAN |
1633 RUBBER RELEASE: Rubber release agent for demanding rubber molding applications such as rubber mats produced from recycled rubber or tire applications for side wall and tread molding. Designed to provide multiple releases per application with no contaminating transfer.
APPLICATION:
♦ Excellent persistence of water repellency and mold releasability
♦ Provides excellent luster and water repellency to molded parts
♦ Mold release spray for urethane casting
♦ Mold release agent for plastics, rubber parts, and tire moldingsMinimum Order Quantity | 24 Piece |
Quantity Per Pack | 500ml |
Packaging Type | Can |
Dielectric Strength | 121Kv/mm |
#6010 ANTI –TRACK: Unique air-dry, di-electric coating designed to prevent tracking, arcing and flash overs caused by dust and moisture specifically on bus bar end-bushings and insulators. Weather proof & non-ageing.
Applications: Bus bar ends, bushings, insulators, switch yard equipments.....
Application | Automotive, Industrial |
Packing | Can |
Color | Black |
Material | Molybdenum Disulfide |
#6028 MOLY ANTISEIZE: A blackish / grey anti - friction spray. Provides an anti - friction shield that will not wash off, scrape, or burn off. Prevent seizure and corrosion to 1000° F., Excellent for marine applications or where salt - water corrosion is present. Also good for stud assemblies, flange bolts, cylinder heads, high - temperature connections, manhole lugs etc.
Applications: Extreme pressure application, Sliding surface, Heavy load application, Slow moving gear, High stress bolting, Stamping, Spline shaft, Threaded part, Pinion, Rack.....
Minimum Order Quantity | 24 Can |
Packaging Type | Can |
Packaging Size | CAN |
Color | Black |
Can Cap Color | Black |
Dry Graphite Lubricant is designed for engine & mechanical parts prior to their assembly. Made of synthetic colloidal graphite and is an ideal lubricant when petroleum products must be avoided. Heat stable up to 850F constant temperature, 1000F intermittent temperature. Excellent choice for extreme temperature lubrication requirements. Dry, oil-free coating that won't attract dirt or dust. Coefficient of friction 0.12. Long lasting lubrication and rust protection.
Applications:
Usage/Application | Twin Tech offers Glass Cleaner under brand name Evershine for cleaning numerous glass items, things |
Cap Type | spray |
Packaging Type | plastic |
GC0122 Glass Cleaner: Environmentally friendly, biodegradable contains no ammonia, caustic, silicates, phosphates, nitrites, phenols Great on glass, ceramics, stainless steel, chrome, formica & much more excellent cleaning of grease, Oil & Light organic safe on all metals and most surface at room temperature.
Residue- Free, neutral PH, ready- to- use formula.
Minimum Order Quantity | 50 100gm |
Material | Vinyl Protectant Tube |
Color | Red Tube |
VP0104 Vinyl Protectant: Evershine Vinyl Protectant provides long lasting protection and shine to vinyl, rubber auto and household products. Natural Shine’s complex formula includes mild cleaning agents that help remove daily dirt and grime and restore the original, natural finish. Includes UV blockers to help reduce the effects caused by the sun. Provides an extremely long-lasting, customizable shine that is not slippery.
The easy to use one-step formula penetrates to protect, beautify, and restore vinyl and leather upholstery, dashboards, tires, weather-stripping, and more. It dries to film that won’t attract dirt…Minimum Order Quantity | 24 un |
Usage/Application | Industrial |
Brand | SPRAYZET |
Quantity Per Pack | 700 ML |
Packaging Type | Can |
Physical State | Liquid |
Packaging Size | 700 ml |
Packaging Size | 500ml |
Packaging Type | Can |
Color | Colorless |
Wax Kote Spray is wax based coating specifically designed for the protection of plastic injection molds. Self de-molds upon mold usage, reducing need for cleaning & rejections. Provides superior, non-drip long & short term protection.
Brand | evershine |
Usage/Application | Automotive |
Material | Liquid |
Shelf Life | 12 months from the date of Manufacturer |
Warranty | 12 months from the date of supply |
Coating | 2-4 coats |
#1632 Semi Permanent Release:-
Description: - Semi Permanent release is specially designed for rotational injection molding to provide large multiple releases. Semi permanent release has no transfer quality to the molded part.
Application: - All type of rotational molding of thermoplastics
Direction: - Clean mold thoroughly (ensure free from any kind of contamination) and apply uniform coating. Allow an interval four minutes to evaporate the solvent. Apply 2-4 coats for best results. After final coat allow to dry the release film for five minutes.
Storage & Self Life:- Store in a cool and dry place, away from direct sunlight. Minimum self life is 12 months from the date of Manufacturer
Warranty: - Each unit is unconditionally warranted against any defect for a minimum period of 12 months from the date of supply.
Minimum Order Quantity | 24 Piece |
Packaging Type | Can |
Fragrance | Lavender |
Stain Resistant | Yes |
Biodegradable | Yes |
Foam Cleaner is designed to clean glass, plastic & other sensitive surfaces, safely, quickly & effectively. It will not allow the plastic to crack, yellow & age. Foam cleaner is non-flammable, 100% ozone safe & do not contain any toxic chemicals. Simply spray on, allow foam to collapse & wipe/wash off.
Applications:
Minimum Order Quantity | 24 Unit |
Packing Type | Can |
Unit Pack Size | 700ml |
Features | Complex Agent |
CU Anti Seize Lubricant is Copper based anti-seize lubricant for high pressure and high-temperature applications, Resists temperature till 1100°C and prevents galling, metal to metal contact and seizing of threaded components. Easy assembly and disassembly even under corrosive atmosphere and long operational period.
Minimum Order Quantity | 24 Piece |
Coefficient of friction | 0.12 |
Heat stable constant temperature | 850F |
Intermittent temperature | 1000F |
Dry Graphite Conductive Sealant is Specifically designed for engine & mechanical parts prior to their assembly. Made of synthetic colloidal graphite and is an ideal lubricant when petroleum products must be avoided. Excellent choice for extreme temperature lubrication requirements. Dry, oil-free coating that won't attract dirt or dust. Long lasting lubrication and rust protection.
Applications:
Features | Additive |
Color | Dark Gray |
Temperature | 420 degree Celsius |
Dry Moly Lubricant is an ultra-pure micro refined dry moly coating with the high temperature and extreme pressure protective characteristics of a high-grade MOS2 coating. The film is non-conductive and has excellent resistance to water.
Minimum Order Quantity | 20 Litre |
Packaging Size | 50 kg |
Packaging Type | Can |
Physical State | Liquid |
Packaging Type | Can |
Propellant | Co2 |
Type | Spray |
Electrical Cleaner Spray is a Non-flammable, precision synthetic cleaner cum degreaser designed for use in electrical maintenance. Di-electric & residues. Safe for use on most plastics (test before use on ABS, acrylic & polystyrenes). Ozone friendly formulation is certified safe for the environment, as well as the users. Does not contain any toxic/carcinogenic chemicals.
Applications:
Application | Industrial Use, Domestic Use |
Packaging Type | Can |
Surface Tension | 20.5N/m |
Rubber Kote is an excellent chemical, abrasion & saltwater corrosion resistance. The flexible rubberized coating can also be used for leak proofing (overlay on epoxy repairs), reducing vibrations, soundproofing, heat insulation & protection of precision equipment.
Packaging Type | Can |
Pack Size | 700ml |
Application | Industrial Use |
Rust Inhibitor Spray Prevents rusting and corrosion of bearings, gears, rotors, gauges during indoor storage, usage, as well as shipment. Uniquely absorbs surface moisture for 100% reliable protection of parts exposed to high humidity and corrosive chemical fumes. Unlike conventional oils, does not overlay on surface moisture, but first absorbs, neutralizes and then provides protection. Lubricant compatible. Removal not required.
Storage | Below 50 degree Celsius |
Odour | Odourless |
Flash Point | less than 0 degree celsius |
PTFE Dry Film Lubricant Interfere with post - finishing operations, durable up to 500°F for extended periods. Extremely effective against dust conditions. A non-staining product that forms a slippery layer of translucent particles on rubber, wood, metals, nylon, epoxies, polypropylene, acrylics and phenolic resins. This film has unique dry lubricating qualities. PTFE dry film lubricant is a dispersion of white, waxy particles of tetrafluoroethylene telomere, wood, and metals. Use on conveyors and chutes, precision and electrical equipment.
Minimum Order Quantity | 24 Can |
Packaging Type | Can |
Pack Size | 700ml |
Application | Industrial Use |
Rust Converter converts rust to metal, consolidating & passivating the substrate, and stopping the unchecked growth of the existing surface rust. Prevents the adhesion failure of conventional paints, thus protecting against corrosion, cracks, leakages etc. Enhances welding strength.
Applications
Minimum Order Quantity | 24 Piece |
Packaging Type | Can |
Packaging Size | 700ml |
Usage | Industrial |
Packaging Type | Can |
Type | Compressor Oil |
Physical State | Liquid |
#6026 DRIPLESS OIL: Light oil, amber color, the fluidity of oil with the driplessness of grease. Longlasting drip free lubrication.
Applications: Textile equipments, overhead chains, conveyors, bearings, and metal forming presses......
Packaging Size | 400ml |
Packaging Type | Can |
Form | Liquid |
Peelable Coat is to remove, waxy coat to protect components during shipment and storage. Does not require any solvent for cleaning or removal, just can be easily peeled off from any of the edges. Protects against scratches, stains, and contamination due to paint spray, dirt, and dust.
Applications:
Packaging Type | Can |
Type | Adhesive |
Packaging Size | 400ml |
Contact Lube is designed to prevent corrosion & carbon deposition on precision electrical & electronic equipment. Ultra-low molecular weight, thermally stable & chemical resistant dry protective film will not pick-up dust & dirt. Reduces contact resistance, provides durable protection & enhances working life & reliability.
Applications:
Minimum Order Quantity | 120 Piece |
Physical State | Liquid |
Grade Standard | Reagent Grade |
Size | 700ML |
Brand | SPRAYZET |
Net Weight | 410 GRAM |
Usage | NON SILICONE |
Country of Origin | Made in India |
Tempreture | Stable up to 180 degree celsius |
Silicone-Free Release Agent is a non-staining, colorless, non-toxic, silicon free compound formulated to provide multiple releases. It prevents sticking of parts in molds and facilitates easy release. It does not transfer to the molded parts. It keeps molds clean and produces extremely low build-up.
Minimum Order Quantity | 24 Piece |
Brand | TWIN |
Packaging Type | Can |
Country of Origin | Made in India |
Flammable | Yes |
Non Chlorinate | Yes |
#6003 ELECTRONIC CLEANER: Fully safe on plastics & metals. Fast cleaning, residueless, low odor formulation. Fully di-electric. Mild flux removing action. Excellent "offline" cleaning and flushing action with least possibility of equipment damage.
Applications: Safe and easy cleaning of sensitive plastic electrical and electronic components - relays, limit switches. PCBs, electronic assemblies... preventing leakages, short circuiting, corrosion and carbonization.
Minimum Order Quantity | 24 Litre |
Usage/Application | Industrial Use |
Form | Aerosol |
Packaging Size | 24 |
Packaging Type | carton |
Color | transparent |
Brand | SPRAYZET |
Country of Origin | Made in India |
4.4/5
Reviewed by 45 Users
Most Relevant Reviews
Response from Seller
Thank you so much for motivating us and giving your honest suggestions. Means a lot. www.twinindia.com